’s request for free.
2 make the mhow to make rubberband braceletsould
The mould is made by the artwork that is confirmed by customer. A mould is made from copper usually. It is a necessary step to start production.
3 Color and rubber mixing
This is the step to prepare the raw material of the bracelet. We have to make the color as the pantone color customer wants.
Commonly 5.5g per bracelet.
5 start production
Set the mould on the machine and warm up to needed tempreture. 15k pcs bracelets can be done in 1 day by 1 machine.
6 edge cutting
Use the machine thow to make rubberband braceletso cut the extra part of the bracelet and divice the bands made by one mould.
7 quality inspection
The defective must be picked out before packing.
8 packing and dilivery
The bulk packing is 100pcs/ bag, 2500pcs/ctn. There can be individually wrapped if customer request. We have the confirm the dilivery details before dispatching.
General size (adult): 8 "(L) x 1/2" (W) x 1/16"(H) or (202MM x 12MM x 2MM)
Women"s size (adult): 7.5 "(L) x 1/2" (W) x 1/16"(H) or 190 MM x 12MM x 2MM)
General size (children): 7 "(L) x 1/2" (W) x 1/16"(H) or (180MM x 12MM x 2MM)
61/2 "(L) x 1/2" (W) x 1/16"(H) or (165MM x 12MM x 2MM)
The maximum screen printed and engraving area for adults is 7.677"X 0.334"
The maximum area of screen printing and engraving for children is 7.00"X 0.334"
As for width, commonly used are:
1/4 "or 6MM
1/2 "or 12MM
3/5 "or 15MM
3/4 "or 19MM
1 "or 25MM